Thursday, August 24, 2017

Bishop Hobbies

Scale Model Builder

Archive for the ‘HMS Victory’ Category

HMS Victory – Imai or Heller 1/100

Posted by Paul On May - 18 - 2009

 

Go to page 2

Go to page 3

 

hms-victory

I got this model in 1985 from my parents for my birthday – it was produced by Imai, but it’s the same as the one by Heller of France. I got it from Model Expo – they had a half price sale so it only cost $50! I have heard that this version has better quality rigging thread. My chief reference is The Anatomy of Nelson’s Ships by C. Nepian Longridge as well as the HMS Victory website. I have made some progress since then – it’s been slow going (I haven’t worked on this in probably 10 years as of 2009) as you can see from the pics:

dsc02203

dsc02254

dsc02255

dsc02256

10/18/2016 Ok call me crazy – but I'm going to finish this.  I have a lot of extra stuff ordered.  I'll post pics when I get it.

10/30/2016 Here is the reference material that I'm using in the Victory build.

First are the instructions that come from Heller – to claim that they are adequate would be the overstatement of the year.  They are essentially worthless.

_DSC3180

Here are the instructions supplied by Imai – the company that produced my kit (which is the same as the Heller kit).  These instructions are a vast improvement.

_DSC3182

Following are the Imai instructions – feel free to copy for your own personal use:

PAGE 1 2017_05_31_09_27_08_Page_1

PAGE 3 2017_05_31_09_29_43_Page_2 PAGE 4 2017_05_31_09_30_20_Page_1 PAGE 4 2017_05_31_09_30_20_Page_2 PAGE 5 2017_05_31_09_31_00_Page_1 PAGE 5 2017_05_31_09_31_00_Page_2 PAGE 6 2017_05_31_09_31_41_Page_1 PAGE 6 2017_05_31_09_31_41_Page_2 PAGE 7 2017_05_31_09_33_22_Page_1 PAGE 7 2017_05_31_09_33_22_Page_2 PAGE 1 2017_05_31_09_27_08_Page_2PAGE 2 2017_05_31_09_28_56_Page_1 PAGE 2 2017_05_31_09_28_56_Page_2 PAGE 3 2017_05_31_09_29_43_Page_1

 

Next we have "The Anatomy of Nelson's Ships" a masterpiece by C. Nepean Longridge.  This book tells the reader exactly how to build a 1/48 scale HMS Victory model.  It even has fold out plans and diagrams.

_DSC3183

I've had the above plans enlarged to be more usable, as you can see in my "shipyard":

_DSC3186_DSC3185

Finally here is "The 100-Gun Ship Victory" by John McKay.  This is another must for building this ship.

_DSC3184

10/28/2016 Today I got some really fantastic goodies from Radek Beseda – he owns HiSModel in Czechoslovakia.  His website is:

www.HiSModel.com

Here are the pics:

First is the thin vineer oak deck:

_DSC3170Next is the thread:

_DSC3171

Here are the fantastic blocks and deadeyes:

_DSC3172

Next are the silk flags:_DSC3173

And finally the hand made sails:

_DSC3174 _DSC3175 _DSC3176

Wow – I can't wait to use this stuff!!

10/30/2016 I didn't like the copper finish on the hull – so I'm redoing it.  I've started by respraying it with ModelMaster gloss black enamel.  That will be followed by Alclad II in copper, clear blue and clear green.  Here is the first step:

_DSC3177

11/1/2016  I've finished the hull repaint.  Here are the paints I used:

_DSC3188

It took a little experimentation to get the effect I want, but I do like what I ended up with.  I used very lights coats of the above in the order shown from left to right.

1 Alclad II gloss black base

2 Alcald II copper

3 Alclad II transparent green

4 Alclad II transparent blue

5 Flory Models weathering wash – light

6 Tamiya XF-5 flat green

7 Tamiya XF-8 flat blue

8 Model Master Acryl aged flat white

All of these added very subtle effects.  Here is the final result:

_DSC3189

_DSC3187

11/2/2016  I've started attaching the veneer decking and deck furnature on the second gun deck.  I used Loctite spray adheasive to hold the deck down.  Here are some pics:

This is before I started….

_DSC3192

Here are some shots at this stage …

_DSC3194_DSC3196_DSC3195

Next I will be installing the cannon on this deck.  There are several that will be visible when the ship is finished, so they will have to be full rigged with block and tackle.  I have extra blocks and eyehooks on order for this.  This will be quite involved, so it will be interesting to see how well I can replicate this.  Here is the cannon rigging diagram:

hms-victory-cannon-rigging

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

11/9/2016  A few days ago I got some more goodies.  

Here are some things from HiSModel:

6 mm belaying pins – 100

_DSC3211

blocks for guns

_DSC3207

cnc brass gun barrels

_DSC3205

eyelets and hooks

_DSC3209

wood channels

_DSC3215

2 and 3 piece parrals

_DSC3216The following items are from

http://www.dafinismus.de/index_en.html

Or you can just click HERE.

Photo etch (channel irons, decks fittings, eyebolts & hooks, and cast knighthead)

_DSC3197

_DSC3202

_DSC3201

_DSC3200

_DSC3206

11/10/2016  The upper deck gun carriages have been assembled and painted.  I'll probably paint the carriage wheels a slightly different color.  I still have to attach the gun tackle ring bolts.

_DSC3217

11/11/2016 I'm working on the cannon rigging and here I'm trying out a false hull partition that allows me to rig the cannon before gluing it to the deck.  The cannon here hasn't been blackened yet.  I don't thing this false wall will be noticable on the lower deck.  I won't be able to use this technique on the upper deck, but access is better so hopefully the cannon breaching tackle will be easier to install.

_DSC3220 _DSC3221

_DSC322312/1/2016 As you can see here I've blackened the cannons.  I've used a blackening agent I purchased online at  MicroMark.  There is one picture of the blackened cannon glued to the cannon carriage.  You can see that the blackening agent will easily smudge off the cannon ridges even though I've treated them twice – something I will have to contend with.

_DSC3247 _DSC3248 _DSC324912/1/2016 Here you can see the lower masts.  I've epoxied brass tubing inside to stiffen them, they are just set in place for this photo.  It's really hard to see here, but I've added 1 1mm x .4mm strip above the upper wale (it's too narrow) and 3 strips below.  This will also allow the chainplates to sit properly with respect to the wale.

_DSC325012/2/2016  I've found a solution to the smudging of the blackening agent.  I just put the cannon barrels into the blackening solution for about 5 minutes – that does the trick.  I leave the barrels on the toothpick holders and I'm able to put 8 to 10 in the bottle at a time – by the way – be sure and wear gloves to protect your hands – this stuff WILL blacken your fingers.  Notice that I've superglued the bottle to a peice to wood to prevent spilling.

_DSC3254 _DSC3255

Here is a picture of some cannons glued in – these don't have breaching tackle because it can't be seen. 

_DSC325112/3/2016 I've started producing the rope coils for the breaching tackle on the cannons.  I've made a rope coil macing if you will out of brass tubing – I started with a very small rod then slid a tube over that then another tube over that repeating till I got the right diameter for my rope coil.  The tubes were glued together with CA, then short sections cut off then the ends sanded till they were smoth.  I piece of plastic sheet stock serves as a coiling shield and the spring supplies the load to keep the two sections together.  The rope is cut to length, then soaked in a 50% solution of white glue and water,  then the end served through the hole in the plastic coiling shield, the parts assembled then the rope coiled till the proper diameter is achieved.  The thread is given a drop or 2 of water to dampen the dried glue then the whole assembly is dried with a hair dryer.  The result as you can see is a reasonably passable coil of rope.  I hope to get better at this as I go along.  Here are the pictures.

_DSC3259

_DSC3266

 

_DSC3267

_DSC3268

_DSC3265Here is another picture with more of the coiled ropes done – I'm getting better at this!

_DSC326912/4/2016 The third gun deck is finished – all visable cannons have been rigged.

_DSC327012/5/2016 Here is a better view of the rope coiling device.  I've used black thread here to make everything easier to see.  The thread is passed through the white disk and then the parts are assembled.  The thread is wound between the white disc and the short brass round part.  The spring (from your everyday pen) keeps things compressed.

_DSC3274Below are pictures showing the upper deck installed.  I had to use some spruce spacers in the bow and stern to keep things spread properly.  It was a tight fit, but in the end it all came together.

_DSC3275

_DSC3273

_DSC3272

_DSC327112/8/2016 Here are some general pictures of main deck furnature installation, as well as install of the stern galleries.

_DSC3284 _DSC3285 _DSC3286 _DSC3287 _DSC3288 _DSC3277 _DSC3278 _DSC3280 _DSC3281 _DSC3282 _DSC3276And here is a photo of the steering as well as the binnacle.

_DSC329012/9/2016  I've attached the stern galleries.  I had to use thin and gap filling super glue as well as thin and thick plastic glue and also epoxy to attach these.  It was a process, but it's done.

_DSC3291 _DSC3293 _DSC3292Here is my first pass at one of the visible 12 lb cannons.

 

_DSC3297 _DSC3298 _DSC329912/11/2016 I've installed the first fully rigged cannon.

_DSC3303Now the poop deck is installed.

_DSC3304 _DSC330512/15/2016 Following are pictures that cover what I've done in the last few days.  I've installed some railing with netting and rolled hammocs.   I've finished two more cannon and they are sitting on deck awaitiing installation.  The rudder has been attached and the rudder irons painted.  I used a battery operated soldering iron to melt the netting down to the support ropes – it was much more precise than cutting.

_DSC3308 _DSC3307 _DSC3306 _DSC3317 _DSC3315 _DSC3314 _DSC3312 _DSC330912/18/2016 I've painted the hammocks with the following – Model Masters aged white flat and Flory's weathering wash (grime) as shown in the following photos:

_DSC3319 _DSC332012/21/2016 I'v done a lot of work up at the bow.  The bow sprit is just set in place here.  I've also included a pic of my new serving maching.

_DSC3323_DSC3324_DSC3325_DSC3326_DSC332212/22/2016  This is my new ropewalk machine.  With it I can produce scale rope from thread.

_DSC332912/23/2016 I've finished the forward cannons.

_DSC3334 _DSC3335 _DSC33361/2/2017 I've installed the starbord side deadeyes and chains.

_DSC3489 _DSC34901/3/2017 I just had to take a break from all of the deadeyes and chains.  So, I worked on the masts – installed the boarding pikes and boom gaff and belaying pin rail, the painted the masts and glued them in.

_DSC34941/3/2017 10:26 PM I've finally finished the lower deadeyes and chains.

_DSC3495This is a closeup of the foremast deadeyes and chains:

_DSC3496And – here is a closeup of the mainmast boarding pikes:

_DSC34971/4/2017 Even though the Heller/Imai have you installing the ships boats in the last step – I've decided to install them now.  I't a lot easier to do it now – if I wait till the end the rigging will make it really difficult.  The downside here is that I'll have to work around the boats as I do the rigging.  I hope that goes ok.

_DSC3498 _DSC34991/5/2017 I'm now working on the brackets, netting for hammocks and hammock placement on the top deck.  

_DSC3501 _DSC3502 _DSC35001/8/2017 I've started the shrouds – working on the mizzen mast first.  Rigging the deadeyes proved difficult at first then I got a procedure established that made it very easy.  I tied the deadeyes to the shrouds by using my serving machine in manual mode.  I've tried 3 different threads for the ratlines – invisible (but still dark) thread, some thread I had purchased, and finally the thread that Imai included with the model.  The invisible thread was too stiff, the next thread had too much fuzz, but the Imai thread is perfect.  I made up a pattern on paper that I then attached to plastic sheet using contact cement.  30 clove hitches done with about 5000 to go – ha ha.

_DSC3530 _DSC3531 _DSC3522 _DSC35241/10/017 I've added some photos of the latest progress.  I've redone the mizzen mast ratlines about 3 times, I continue to have the outside shrouds pulled inward.  I've decided to add some temporary outlier shrouds to keep the regular outside shrouds from being pulled inward.  You can see this from the picture, I'll have to wait and see if this indeed helps.  

I've also finished the bow figure's crown and then was able to set the bow spirit and rigg that.  I've also added the walkway to the bow spirit.  On cannons you can notice the monogram that I've added to the barrel's.

_DSC3534 _DSC3533 _DSC3532 _DSC3536 _DSC35351/11/2017 I've finished the starboard mizzen ratlines

_DSC3537 _DSC35381/14/2017 I installed the main shrouds and lower forstays.  Both of the lower forstays have been wormed using my serving machine.  That worked out really well and looks great.  You really can't tell in the pictures tho.

_DSC3539 _DSC3542 _DSC35431/15/2017  I've made up a ratline jig.  I got the idea from an entry on NRG's Model Ship World and slightly modified his idea.  It's made up of two lengths of 3mm x 6mm plastistruct with fine sand paper glued on one 3mm side.  I use brass wire to close the ends – this traps the shrouds inside and the sandpaper keeps them from sliding around.  The 3mm length translates to 12 inches 1/100 scale; this will end up being closer to about 14 inches when all is done which is about right for ratline spacing.  As you can see the resulting ratline is nice and straight and hopefully this jug will prevent the dreaded pulling in on the outside shrouds.    When I attach the jig to the shrouds I make shure it's level using the level in the last picture.  Here are some pics:

_DSC3544_DSC3545_DSC3547_DSC3549_DSC35461/17/2017 I've been working on the mainmast ratlines. The starboard side is done, now I'm working on the port side.  The ratline jig is really working well.

_DSC35511/19/2017 I've finished the main mast lower ratlines, I've also started to rig the fighting tops. There are several 2 mm blocks on the bottom of each of these, rigging these may be a problem – they aren't in an easy to get to place.

_DSC3553 _DSC35541/20/2017 I've finished the forward mast lower shrouds.  Next I'll be working on the ratlines, and the next section of the bow spirit.

_DSC3555

_DSC35581/21/2017 So for the last month I've had a rash on both arms.  I've been to the doctor and he gave me some pretty strong stroids for 5 days.  That didn't do it.  I got to thinking – maybe I have a reaction to the CA I've been using.  I have it out in cups to use so the fumes (I can't smell them) are always there.  I'm also using it in a unventelated room – so that isn't good.  I've decided to change from CA to clear flat lacquer to seal the rigging knots, and have also ordered a professional mask to wear.  Hopefully these things will help.

I've installed the bow spirit today.  The second section is made up of a brass tube with the plastic ends epoxied on.  The third and last section is made up of a tapered bamboo shiskabob stick.  The kit plastic parts are way too flexible to use.  As I've built it the bow spirit is much more rigid and will handle the rigging much better.  On to the pics:

_DSC3559_DSC3560_DSC3562_DSC35631/23/2017 I've added the lower forestay to the bowspirit and started the lower foremast ratlines.

_DSC3567 _DSC3568 _DSC35661/27/2017 I've now finished all of the lower shrouds and ratlines, have rigged and installed the fighting tops.  I'm finally out of clove hitch hell!  At least for a while.  I will now start on the upper sections of the masts, working from the mizzen mast forward as I think that will be the easiest.

_DSC3587

_DSC3571_DSC3574Here is a pic of my thread rack.  I need a lot of thread of different size black and light tan and this helps to keep things organized.

_DSC35691/28/2017 I've glued together then painted and finally installed the upper mast sections.  The main mast and fore mast have brass tubing epoxied inside in the middle sections for rigidity.  The alignment between the masts isn't perfect, I'll have to adjust that with the shrouds.

_DSC3583

_DSC3587

 

For more on this model build go to page 2 HERE.